JVC HM-DR10000EU specifications Edit To Or From Another Video Recorder

52ENEDITING(cont.)

Edit To Or

From Another

Video

Recorder

You can use your video recorder as the source player or as the recording deck.

MAKE CONNECTIONS

1 Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 53.

AWhen Using Your Video Recorder As The Source Player ...

... connect its AV1 IN/OUT connector to the recording deck.

BWhen Using Your Video Recorder As The Recording Deck ...

... connect its AV2 IN/DECODER or AV1 IN/OUT connector to the source player.

CIf Another Recorder Is Compatible With The Y/C Signal ...

... connect your recorder's AV1 IN/OUT connector to another recorder.

With C connection ...

1– –:– –

2

1 2 3

4 5 6

7 8 9

3

4

4

●When using your recorder as the recording deck, set "AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to "AV2" (☞ pg. 54).

●When using your recorder as the source player, set the AV1 OUT switch on the rear panel to Y/C (☞ pg. 4).

2	SET RECORDING MODE
	Set the appropriate recording mode (D-VHS, S-VHS or
	VHS) (☞ pg. 22, 23).

NUMBER "0"

0

MENU

1

2

3 OK

TV PROG

		SET RECORDING DECK’S
3		INPUT MODE
	Set to AUX. With this video recorder, press NUMBER
		key "0" and/or TV PROG to select "L-1" for the AV1 IN/
		OUT connector, or "L-2" for the AV2 IN/DECODER
		connector, depending on the connector being used.
		● When using the AV2 IN/DECODER connector, make
		sure "AV2 SELECT" is set to "AV2" (☞ pg. 54).
		SET EDIT MODE (S-VHS/VHS
4		MODE ONLY)
	See "Picture Control" on page 49.
5		START SOURCE PLAYER
	Engage its Play mode.
6		START RECORDING DECK
	Engage its Record mode.