JVC HM-DR10000EU specifications Compatibility Of Cassettes And Recording Mode

STOP RECORDING

Press PAUSE. Press PLAY to resume recording.

5

6 Press STOP. Then press EJECT to remove the cassette.

Insert a cassette with the record safety tab intact.

● The counter is reset to 0:00:00 and the recorder power comes on automatically.

CHOOSE A PROGRAMME

Press TV PROG +/– or the NUMBER keys to select the channel you wish to record.

● The TV PROG dial can also be used to select a channel.

SET TAPE SPEED

Press SP/LP ( ). Check the SP/LP indicator on the front display panel to confirm the selected tape speed.

START RECORDING

Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette.

If "DIRECT REC" is set to "ON", the programme that appears on the TV screen will be recorded (☞ pg. 13).

PAUSE/RESUME RECORDING

1

2

3

4

EN 23

S-VHS/VHS Recording

LOAD A CASSETTE

Compatibility Of Cassettes And Recording Mode

		Recording Mode
Cassette
	D-VHS	S-VHS	VHS
D-VHS	Yes	Yes	Yes
S-VHS	No	Yes	Yes
VHS	No	No	Yes

NOTES:

●The D-VHS (MTP), S-VHS and VHS mode recordings are possible with this recorder.

●To record in the D-VHS mode, use a D-VHS cassette.

●To record in the S-VHS mode, you can use a S-VHS or D- VHS cassette.

●To record in the VHS mode, you can use a VHS, S-VHS or D-VHS cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab