6 |
| ENTER CHANNEL POSITION |
| ||||||||||
Press TV PROG | – P1 – |
| |||||||||||
|
|
|
|
|
| ||||||||
|
|
| START |
|
| STOP |
| ||||||
|
| 21:00 |
| = |
| 22:00 |
|
| |||||
|
|
|
| SP(STD) |
| VPS/PDC OFF |
| ||||||
|
|
|
| DATE |
|
| TV PROG |
| |||||
|
|
| 25.12 |
|
| 1 |
|
|
| ||||
|
|
|
|
|
|
|
|
| ARD |
|
| ||
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| [PROG] : EXIT |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SP |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 | SET TAPE SPEED | |
|
| |
Press STD/LS3 ( | ) to set the tape speed. | |
| ||
| Press SP/LP ( | ) to set the tape speed. |
8 |
| SET VPS/PDC MODE |
Press VPS/PDC to select "ON" or "OFF". | ||
| If "VPS/PDC ON" is displayed on the screen or "VPS/ | |
| PDC" is lit on the display panel, VPS/PDC is set to ON. | |
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC" | ||
|
| is not lit on the display panel, VPS/PDC is set to OFF. |
| ☞ "VPS/PDC Recording" in the right column. |
|
| RETURN TO NORMAL | |
|
| SCREEN | |
| After confirming all information is correct, press PROG | ||
|
| or OK. "PROGRAM COMPLETED" appears on the | |
9 screen for about 5 seconds, then normal screen | |||
|
| appears. | |
|
| ● Repeat steps 1 – 9 for each additional programme. | |
|
|
| |
|
| ENGAGE RECORDER’S | |
10 |
| TIMER MODE | |
Press ä (or äTIMER). The recorder turns off automati- | |||
| |||
|
| cally and ä appears on the display panel. The äTIMER | |
|
| indicator on the recorder also lights up. | |
|
|
| |
|
| ● To disengage the timer, press ä (or äTIMER) again. |
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the correspond- ing indication disappear.
NOTE:
You can programme this recorder to
EN33
Satellite Tuner Users
To
1Set "AV2 SELECT" to "AV2" or "SAT (☞ pg. 54).
2 Perform steps 1 – 10. Select
3 Set the satellite tuner to the appropriate channel before the selected programme begins.
4 Leave the satellite tuner's power on.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.
NOTES:
●When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.
●VPS/PDC recording is also possible when a satellite tuner or a cable system is connected to AV2 IN/DECODER on your recorder.
●VPS/PDC recording is also possible via the AV1 IN/OUT connector.
How to check if the station being received transmits a VPS/PDC signal
1Press –
2Hold down START+ for about 5 seconds.
● "VPS/PDC" appears blinking on the display panel.
If a VPS/PDC signal is detected from the station, "VPS/ PDC" will stop blinking.
If no VPS/PDC signal is detected from the station, "VPS/ PDC" will blink at a slower rate.
3Press –