14
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Preparation Ö Load a disc in the CD player.
Hereafter the illustration of the common parts on the front panel is of
REMOTE CONTROL UNIT
1Press so that the “PGM” indicator lights.
Do this operation in the stop mode.P.MODE
2Program desired tracks.
1Select the disc.
DISC 1 DISC 2 DISC 3 |
| DISC 4 DISC 5 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Go to step 2 within 8 seconds.
2Select the desired track No.
Main unit | Remote control unit | |||
|
| 1 | 2 | 3 |
4 | ¢ |
|
|
|
|
| 4 | 5 | 6 |
|
| 7 | 8 | 9 |
|
|
| 0 | +10 |
Go to step 3 within 8 seconds.
3Set the entry.P.MODE
4 Repeat steps 1, 2 and 3 above.: Keys and controls used in the operations described on this page.
CD-206/DPF-R6010 Blinks.
PGM01 DISC?
Light up.
PGM
1 2 3 4 5
PGM01 D1 TNO.??
In the case of a
Press the numeric keys as shown below....
To enter track No. 25 : 005
PGM01 D1 TNO.25
Ç
PGM01 ABCDEFGH
In the case of a
PGM01 D1 TNO.25
PGM |
| 5 |
DISC | REPEAT |
|
NO. | TRACK NO. |
1 2 3 4 5 1 2 5 P _0 1
Track number
ÖTracks can also be selected by pressing the 4 or ¢ key.
ÖUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed.
ÖIf you make a mistake, press the CLEAR key and enter the track No. from the beginning.
3Start playback.
6 |
ÖWhen the 4 or ¢key is pressed during playback, the track will be skipped in the direction of the pressed button.
ÖWhen the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played.