Timer operations
Timer playback of CD can be started at any time using an audio timer which is available in audio stores.
Preparation ÖConnect the power cords of the associated components so that their power can be turned ON through the audio timer.
(Also, be sure to read carefully the instruc- tion manual of the timer.)
1Turn the powers of the associated componentsON.
2Preparation
Load a disc in the CD player. | 9 |
Label side
3Set the amplifier volume.
1Play the disc.6 |
This unit
23
System control cord |
| Audio cord | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amplifier
12 : 00
Audio timer | To wall AC outlet |
|
ÖIf the amplifier is not connected to the CD player through a system control cord, select the "CD" input with the input selector.
(Use the remote control unit (Except CD-
7 |
Note
Set the volume the maximum (0 dB) using the OUTPUT (UP) key on the remote control unit (Except
(Since the sound output is at the maximum level when the power is turned on, lowering the level with the remote control unit will change the volume.)
4Set the timer ON time.
Set the timer so that it supplies power at the specified time.
ÖWith some audio timer models, the power is automatically turned OFF when the timer ON time is set. With such a model, skip step 5 below.
5timer.Turn OFF the power output from the audio
ÖDo not touch the ON/STANDBY (POWER/ ) switches of the amplifier and CD player.
ÖWhen the set time comes, the disc playback starts automatically.
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it.
Notes 2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.