Kenwood DPF-R3010 MULTI EDIT Except for CD-206/DPF-R6010, Editing, 3Select the desired track

Several CDs can be edited and recorded on 1 tape. Choose songs from each disc, and edit/record while con- firming the remaining time on files A and B, respectively.

REMOTE CONTROL UNIT

RC-P0601

Editing

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

Hereafter the illustration of the common parts	21
on the front panel is of CD-206/DPF-R6010.

: Keys and controls used in the operations described on this page.

MULTI EDIT (Except for CD-206/DPF-R6010)

1Press so that the "MULTI EDIT " indicator light.

Do this operation in the stop mode.			Light up.
EDIT
	PGM		MULTI	DISC
			EDIT
				NO.
1	2	3	4	5
Press twice

2Enter the recording time of the tape.)

3Select the desired track.

1Select the disc (one disc only).

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

2Select the tracks to be recorded.

Main unit		Remote control unit
4	¢￿	1	2	3
		4	5	6
Ç		7	8	9
P.MODE			0	+10

ÖIf you made a mistake, press the CLEAR key and select the correct track.

ÖThe time remaining on side A or side B is indicated on the display.

ÖWhen the time left on side A is less than the play time of the selected song, that song will be programmed on side B.

ÖIf “FULL” is displayed, no further programming can be accepted.

4Start recording.

When recording with a cassette deck equipped with CCRS function:

Press the CCRS key (Cassette deck).

When recording with a normal cassette deck:

1Adjust the recording levels.

2 Press the record key.

3Play the CD.

5Repeat step 3,4 above.

ÖWith the CCRS function, the recording starts after about 1 minute.

ÖIf you have a cassette deck capable of Double-speed recording, use Normal-speed recording.

ÖChange discs and, if the “b-01”indication is given when you first select a song, turn the tape to the start of side B.