Kenwood DPF-R4010 Editing, Normal EDIT, Edit Disc?, EDIT DISC3 C-46, 1Light the “EDIT” indicator

Editing

The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the

20 middle at the ends of sides A and B.

Normal EDIT: Edit from one disc.

MULTI EDIT: Edit and record from several discs.

Preparation ÖLoad a disc in the CD player.

ÖCheck that the unit is in the normal play

TRACK mode. !

Normal EDIT

1Light the “EDIT” indicator.

Do this operation in the stop mode.

EDIT

Go to step 2 within 8 seconds.

If more than 8 seconds have elapsed, press the key again.

2Select the disc.

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

Go to step 3 within 8 seconds.

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010.

REMOTE CONTROL UNIT

RC-P0601

: Keys and controls used in the operations described on this page.

CD-206/DPF-R6010Blinks.

EDIT DISC?

CD-204/203/DPF-R4010/R3010

Light up.

PGM	MULTI
	EDIT

1 2 3 4 5

3Enter the recording time of the tape.

When using the numeric keys:

Main unit		Remote control unit
4	¢￿	1	2	3
		4	5	6
		7	8	9
	Ç		0	+10
	EDIT

When using the TIME DISPLAY key:

1 Select the time.	2 Set the entry.
TIME DISP.	EDIT
	\

Press the numeric keys as shown below.

30-minute tape : 000)

46-minute tape : 00006

CD-206/DPF-R6010

EDIT DISC3 C-46

CD-204/203/DPF-R4010/R3010

Blinks.

1 2 3 4 5

6 7 8 9 10

C _ 4 6

ÖThe interval length can be adjusted with the skip keys 4 and ¢ in units of one minute (to a maximum of 99 minutes).

ÖIf you commit a mistake in time entry, press the P.MODE key and restart the procedure from the beginning.

CD-206/DPF-R6010

ÖBy pressing the TIME DISPLAY key the set time-length intervals will change in this order: "46=54=60=74=90=??"

=CD-204/203/DPF-R4010/R3010

ÖBy pressing the TIME DISPLAY key the set time-length intervals will

change in this order: "46=54=60=90= - - " =

ÖAutomatic editing is executed for side A and side B,