Kenwood DPF-R3010 16To clear tracks from the program, Auto space function, CD-206/DPF-R6010

Programmed play (PGM mode)

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

16To clear tracks from the program

Press to clear tracks from the end.

CD-206/DPF-R6010

CLEAR

RC-P0601

ÖEach time the key is pressed, the last track in the program is cleared.

ÖThe tracks which are programmed earlier than the track being played cannot be cleared.

CD-204/203/DPF-R4010/R3010

CLEAR

To clear all tracks

P.MODE

ÖSelected tracks can be also completely cleared just by operating the 0 key.

ÖThe entire program is cleared.

To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)

1Press so that the "PGM" indicator lights.

P.MODE

2Select the desired disc.

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

3 Press the P. MODE key again.

ALL indicator lights up.

P.MODE

1 2 3 4 5

ALL 6 7 8 9 10

P _ 0 1

Auto space function

During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By record- ing tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably.

ÖEven when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos.

Time display on CD player (TIME DISP.)

Each press of the TIME DISP. (TIME DISPLAY) key changes the displayed contents.

Do this operation in the play mode.

TIME DISP.

CD-206/DPF-R6010

1 1:23 : Elapsed time of track being played

2-2:23 : Remaining time of track being played 3 23:45T : Elapsed time of entire disc (T lights up.)

4 -36:25T : Remaining time on entire disc (T lights up.)

CD-204/203/DPF-R4010/R3010

1 1:23 : Elapsed time of track being played (SINGLE lights up.)

2-2:23 : Remaining time of track being played (SINGLE lights up.)

323:45 : Elapsed time of entire disc (TOTAL lights up.) 4 -36:25 : Remaining time on entire disc (TOTAL lights up.)

ÖOnly the display 1and 2will be displayed in PGM, RANDOM and EDIT modes.