Kenwood DPF-R3010 Maintenance, 24Disc handling precautions, CD accessories, Cleaning, Storage

Maintenance

24Disc handling precautions

		Handling
		Hold compact discs so that you do
		not touch the playing surface.
	Label side	ÖDo not attach paper or tape to either
	Playing side	the playing side or the label side of
Sticker		compact discs.
		ÖThe paste left on the label surface
		after a sticker has been peeled off is
		a factor which may cause malfunc-
		tion. If the surface is sticky due to
		remaining paste, be sure to clean it
	Sticky paste	with alcohol before use.
		Cleaning
		If fingerprints or foreign matter be-
		come attached to the disc, lightly
		wipe the disc with a soft cotton cloth
		(or similar) from the center of the
		disc outwards, in a radial manner.
		Storage
		When a disc is not to be played for a
		long period of time, remove it from
		the CD player and store it in its case.

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

Discs which can be played with this unit

CD (12 cm, 8 cm) (CD-TEXT support), CDV (only the audio part)

ÖWith CD-G (CD Graphics) discs, this unit can play only the audio part.

Never play a cracked or warped disc.

During playback, the disc rotates at high speed in the player.

Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent.

Please do not use discs which are not round because they may cause a malfunction.

CD accessories

The CD accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.

Cleaning

Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside.

This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dried up.

Be specially cautious against condensation in a following circumstance:

When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.

Note related to transportation and move- ment

Before transporting or moving this unit, carry out the following operations.

1.Turn the unit ON but do not load a disc.

2.Wait a few seconds and verify that the display shown appears.

CD-206/DPF-R6010
	NO	DISC
CD-204/203/DPF-R4010/R3010
		1	2	3	4	5
		6	7	8	9	10
		11	12	13	14	15
	1 2 3 4 5	n o d I S C 16	17 18		19	20

3.Press the 0OPEN/CLOSE key to open the disc tray completely.

4.Press the 0 OPEN/CLOSE key again to close the tray.

5.Wait a few seconds and set the unit to STANDBY mode.