JVC HM-DR10000EU SET Counter Display, Reset Counter, Display Remaining Time, Tape Remaining Time

DISPLAY COUNTER RESET

EN25

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1 Press – –:– – (or DISPLAY) until a counter reading appears on the display panel.

RESET COUNTER

2 Press 0000 (or COUNTER RESET) before starting recording or playback.

●The counter is reset to "0:00:00" and shows the exact elapsed time as the tape runs.

1

2

0000

1

2

– –:– –

1 2 3

4 5 6

7 8 9

0

– –:– –

3

4

4

3

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press – –:– – (or DISPLAY) until the time remaining on the tape appears.

●The display panel shows the tape remaining time with "" displayed.

●By pressing the – –:– – (or DISPLAY) button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.