JVC HM-DR10000EU Connection To Satellite Tuner, Simple Connections, Satellite Tuner Unit

SYSTEMCONNECTIONS

EN57

Connection To

ASatellite Tuner

Simple Connections

This is an example of simple connection if you don't have a decoder.

Connect the satellite tuner to the video recorder's AV2 IN/ DECODER connector, then connect the recorder's AV1 IN/OUT connector to the TV's 21-pin SCART connector.

NOTES:

●Set "AV2 SELECT" to "AV2" or "SAT". (☞ pg. 54)

●You can use Automatic Satellite Program Recording function (☞ pg. 37) with this connection.

●To record a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that "L-2" appears on the display panel.

●If both the satellite tuner and the TV have S-VIDEO connec- tors, you can enjoy high-quality S-VHS pictures. Connect your recorder and the TV via S-VIDEO connection (☞ pg. 5), then connect the satellite tuner's S-VIDEO and AUDIO output connectors to the recorder's S IN and AUDIO IN connectors on the rear panel. Select S-1 mode by pressing NUMBER keys and/or TV PROG, so that "S-1" appears on the display panel.

●For details, refer to the instruction manual for the satellite tuner.

Outdoor Unit

Satellite Cable

Satellite Tuner Unit

DECODER VCR TV

Aerial

Aerial connector

Back of TV

TV Aerial cable

ANT. IN

RF OUT

21-pin AV input connector (SCART)

Mains outlet

AV1 OUT switch

			SYNCHRO EDIT
			JLIP
			R.PAUSE
S OUT S IN	AV1 OUT	L
(S-1)	COMP. Y/C
	AV1 IN/OUT(L-1)	AUDIO	ANT. IN
		R
			OUT IN(S-1)
	AV2 IN/DECODER(L-2)		ANT. OUT

DV IN

Back of Recorder

IMPORTANT

When you set "AV2 SELECT" to "SAT" (☞ pg. 54), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel.

●In this case, be sure to set the AV1 OUT switch on the rear panel to COMP.