JVC HM-DR10000EU specifications Digital TBC/NR S-VHS/VHS Mode Only, Digital 3R S-VHS/VHS Mode Only

Digital TBC/NR (S-VHS/VHS Mode Only)

Your video recorder is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes.

The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function.

* The default setting is "ON".

We recommend that you use the Digital TBC feature when...

... playing back a tape recorded on a camcorder.

... playing back a tape repeatedly used.

... using this video recorder as the player for editing.

	DIGITAL TBC/NR indicator
	ACTIVATE DIGITAL TBC/NR
1
	Press DIGITAL TBC/NR so that DIGITAL TBC/NR
	indicator lights up.
	● To turn off DIGITAL TBC/NR, press DIGITAL TBC/NR
	again so that the indicator goes off.

NOTES:

●If you play back a tape recorded under poor TV reception condition, there may be cases where the picture becomes more stable with Digital TBC/NR set to off.

●When Digital TBC/NR is set to on, if you play back a tape where certain types of signals are recorded (using a PC or some character generators), the playback picture may be distorted. If this is the case, turn off Digital TBC/NR.

●When playing back a MESECAM tape, Digital TBC/NR does not function even though the indicator is lit.

EN19

Digital 3R (S-VHS/VHS Mode Only)

Digital 3R picture system applies edge correction to the luminance and chrominance signals to enhance detail.

		ACCESS MAIN MENU
1		SCREEN
	Press MENU.
		ACCESS MODE SET
2		SCREEN
	Move the highlight bar		MAIN MENU
		(pointer) to "MODE SET" by
		pressing %Þ, then press	MODE SET
			AUTO CH SET
		OK or #.	MANUAL CH SET
			INITIAL SET
			VIDEO NAVIGATION
			T
			[5°] =
			[MENU] : EXIT
		SELECT DIGITAL 3R SET
3		MODE
	Move the highlight bar		MODE SET
		(pointer) to "DIGITAL 3R"	B. E. S. T.	ON
		by pressing %Þ, then press
			PICTURE CONTROL	AUTO
		OK or # to set to "ON".	AUTO TIMER	OFF
			O. S. D.	ON
			DIRECT REC	ON
			AUTO SP=LP TIMER	OFF
			DIGITAL 3R	ON
			NEXT PAGE
			[5°] =
			[MENU] : EXIT
		RETURN TO NORMAL
4		SCREEN
	Press MENU.

NOTES:

●Normally it is recommendable to keep "DIGITAL 3R" set to "ON".

●Depending on the type of tape being used, picture quality may be better with "DIGITAL 3R" set to "OFF".