27
Static IP Mode
To setup the Gateway for use with a static IP address connection,
use the following procedure:
Figure 17 Static IP Mode Screen
1Enter your IP Address in the IP Address text box.
2Enter your subnet mask in the Subnet Mask text box.
3Enter your ISP gateway address in the Internet (ISP) Gateway
Address text box.
4Enter your primary DNS address in the Primary DNS Address text
box.
5If your ISP provides a secondary DNS address, enter it in the
Secondary DNS Address text box, otherwise leave the box blank.
6Click Next to continue.
Dynamic IP Address Mode
To setup the Gateway for use with a dynamic IP address
connection:
Figure 18 Hostname Screen
1If your ISP requires the addresses of a Primary and Secondary
DNS Server then enter them in the fields labelled Primary DNS
Address and Secondary DNS Address.
If your ISP does not require one of the fields to be filled in then
leave it blank. This indicates to the Gateway that there is no
server.
2If your ISP requires you to supply a host name enter it in the Host
Name box, otherwise leave the box blank.
3Click Next to continue to the Clone MAC Address screen, shown
in Figure 19 below.
dua08569-5aaa02.boo k Pag e 27 Thursday , Novem ber 7, 2002 3:09 PM