26
Auto-Configuration Settings
If the Gateway is able to detect a PPPoE or DHCP server on its
Ethernet Cable/DSL port then it will offer you the option of
configuring its Internet settings automatically. As an example, the
Auto-Configuration screen for PPPoE is shown in Figure15
below.
Figure 15 PPPoE Auto-configuration Screen
Click Next to accept the option you have chosen and continue.
■If the Gateway could not automatically configure your
internet settings or if you chose to configure your Internet
settings manually, continue at “Internet Settings” below.
■If you chose one of the automatic configuration options
continue at “Choosing your LAN Settings” on page 29.
Internet Settings
The Internet Settings window allows you to set up the Gateway
for the type of Internet connection you have. Before setting up
your Internet connection mode, have the modem configuration
supplied by your ISP to hand.
Figure 16 Internet Settings Screen
Select the Internet Addressing mode your ISP requires and click
Next. Depending on your selection, refer to:
■“Static IP Mode” on page 27
■“Dynamic IP Address Mode” on page 27
■“PPPoE Mode” on page 28,
■“PPTP Mode” on page 29.
dua08569-5aaa02.boo k Pag e 26 Thursday, Novem b er 7, 2002 3:09 PM