23
RUNNING THE SETUP WIZARD
If the Gateway needs to be configured, for example if it has not
yet been used or has been reset, it will run the Setup Wizard
automatically. This detects some of the settings the Gateway
needs to function and asks that you input the others.

Accessing the Wizard

The Cable/DSL Secure Gateway Setup Wizard is Web-based,
which means that it is accessed through your Web browser
(Netscape Navigator or Internet Explorer).
To use the Setup Wizard:
1Ensure that you have at least one computer connected to the
Gateway. See “Installing the Gateway” on page 15.
2Launch your Web browser on the computer. Enter the URL of
your Gateway in to the location or address box of your browser
(Figure 9).
The default URL for the gateway is http://192.168.1.1. If you
have changed the IP address of the unit you should substitute
this for the default address within the URL.
Figure 9 Web Browser Location Field (Factory Default)
The Login screen, as shown in Figure 10, should appear in your
browser. If it does not, refer to “Troubleshooting” on page 67.
3To log in, enter the password (the default password is admin) in
the System Password field and click Log in.
Figure 10 Login Screen
4If the password is correct, the OfficeConnect Cable/DSL Secure
Gateway Welcome screen, shown in Figure11, will appear. If
your Gateway has not been configured before, the Wizard,
shown in Figure 12, will also launch automatically.
dua08569-5aaa02.boo k Pag e 23 Thursday, Novem b er 7, 2002 3:09 PM