USING ThE TIlTING POCkET
The Tilting Pocket can be used to store up to a 16”(406mm) pizza if you place it shown in the illustration.
REMOVING ThE REFRIGERATOR ACCESSORIES
1. Door bins & Dairy Compartment
To remove - Simply Lift the bin up and pull straight out.
To relocate - Slide it in above the desired location and
push down until it stops.
Injury may occur if the door bins are not firmly
assembled. Do not allow children to play with bins.
CAUTION Sharp corners of the bins may cause injury.
Do not adjust a bin full of food.
2. Tempered Glass Shelves |
|
To remove - Tilt up the front of the shelf in the |
|
direction of ( 1 ) and lift it up in the | 1 |
direction of ( 2 ). Pull the shelf out. | 2 |
To relocate - Tilt the front of the shelf up and guide | |
the shelf hooks into the slots at a |
|
desired height. Then lower the front of |
|
the shelf so that the hooks can drop |
|
into the slots. |
|
The Tempered Glass shelves are heavy. CAUTION Use special care when removing them.
Remove the shelves from the shipping position and replace shelves in the position you want.
3. Vegetable & Fruit Drawers
To remove - Pull the drawer out to full extension. Tilt up the front of drawer and pull straight out.
To relocate - Insert the drawer into the frame
rails and push back into place.
The glass shelf over the drawer is not 
firmly secured. Be careful when lifting. Do
CAUTION not open the drawer when the pantry is
opened. It may cause scratch or breakage to it’s cover.
To get the best energy efficiency of this product, please leave all selves, drawers and baskets on their original position like as illustration in page 23
26_Operating
