Monitoring Mode

Introduction

In Monitoring Mode, the system only displays external signals (CVBS, S-VIDEO, DV, TV, Y/Cb/Cr) selected by the user on the TV screen directly without conducting other operations. You can review the content of the external signals in Monitoring Mode. This mode is for selecting the recording input source.

The Selection of Monitor Signals

Use the "SOURCE" to select monitoring signals.

1.In Monitoring Mode, press the "SOURCE" button repeatedly to cycle through various input sources as shown in the following chart:

TV Monitor Front CVBS Rear CVBS Rear S-Video DV DVD Play

2.Press the "TV" button directly to enter the TV Input Signal Mode. (With the Viewing decoded Channel function, press the "TV" button to switch between TV signals of the unit arid the TV).

3.Press the "DV" button directly to enter the DV Input Signal Mode.

4.To select a TV channel, enter the channel number directly.

For example, the channel number is 008, press 8 once, and then press "SELECT" to enter, or wait for 5 seconds to enter automatically.

5. Press the "Channel +/-"button to switch channels.

Use the menu to select monitoring signals

Note:

Before receiving TV signals for the first time, please conduct the Channel Scan operation. For details, see "System Setup: Channel Scan" for reference.

Navigation Mode

The NAVIGATION Mode can realise all functions of the unit.

Switch to Mode Play

Press the "Guidance" button of the remote controller to display the screen on the left.

1.Switch to Playback Mode;

2.Switch to Recording Mode;

3.Switch to Editing Mode;

4.Switch to Disc Operation Mode;

5.Switch to System Setup Mode;

6.Switch to Timer Recording Setup Mode;

1 2 3 4 5 6

14

Page 15
Image 15
Palsonic DVD R 212 manual Monitoring Mode, Navigation Mode, Introduction, Selection of Monitor Signals