Palsonic DVD R 212 manual Enter the Disc Operation Mode, Operation Steps Erase Disc, Lock Disc

Disc Operation

Introduction

The Disc Operation means something done to recordable discs in the drive, including browsing disc information, finalising a disc, removing disc content, deleting the last title, compatibility and write protection, etc.

Enter the Disc Operation Mode

When the system detects DVD+R or DVD+RW disc in the drive, press the "DISC OPER" button to enter the mode.

Menu Description
The control bar menu under this mode is as shown in the chart.
		1	Play
The meanings for the icons are as follows.
		2	Rename Disc
1.	Play: Play the content of the current disc.
		3	Erase Disc
2.	Erase Disc: Once this operation is done, all content in the disc will be
		4	Record a New Title
removed completely. The disc index will appear as blank on the screen.
		5	Overwrite Disc
3.	Rename Disc: Rename the disc (default name: MY DVD).
4.	Record a new title: Add a new title to record.	6	Finalize Disc
5.	Overwrite Disc: An operation on a recorded DVD+RW disc	7	Lock Disc

to overwrite its previous content.

6.Lock Disc:. This function prevents the deletion of recorded content.

7.Finalise disc: This function enables the DVD+RW disc to be played in other DVD players. Once the disc is finalised, no further writing or change is allowed. (Such operation applies only to DVD+R discs)

Operation Steps

Erase Disc

This operation is effective for DVD+RW discs. In the Disc Operation control bar menu, use the or button to select the "Erase Disc" option, press the "SELECT" button and a warning message pops up, "This operation will erase all data on the disc. Are you sure you want to continue". Press the button to select "Yes", and then press the "SELECT" button to confirm. Then the system will start erasing the disc.

Play

Rename Disc

Erase Disc

Record a New Title

Overwrite Disc

Finalize Disc

Lock Disc

The Erase Disc operation may take some time. During the operation, do not conduct any other operation, including standby; once the operation starts, it cannot be cancelled midway. Never switch off the power during the operation; otherwise the disc may be damaged.

Lock Disc

This operation will .cancel the write protection of a locked disc. This function is available only for DVD+RW discs.

1.In the Disc Operation control bar menu, use the or button to select the "Lock Disc" item, and then press the "SELECT" button.

To judge if a disc is write-protected, try the "Browse Disc Information" operation. A write-protected disc cannot be recorded, erased or edited unless the write protection is cancelled.

Play

Rename Disc

Erase Disc

Record a New Title

Overwrite Disc

Finalize Disc

Lock Disc

23