Other Operations
43
1. In the normal working status, press the red button "STANDBY/ON" of the remote controller to enter the
Standby status.
In the Standby status, the VFD will display current time as a clock. For the clock adjustment, please
see "System Setup: System Clock Settings"
In the Standby status; the red Standby LED on the front panel is ON.
To prevent damage, the operation is disabled when the unit is writing or erasing a disc.
2. Press the "STANDBY/ON" button on the front panel or the remote controller again, the system will resume
working.
In the normal status, the red Standby LED is OFF.
Standby