Recording Mode
Recording Process Control (continued)
2.Use the corresponding function keys of the remote controller, such as "RECORD", "PAUSE/STEP" and "STOP" to select from "Record, "Pause" and "Stop" functions in the recording process.
When a "Stop" operation is done, the system will write some information into the disc. The system will not respond to any button pressing at that time.
When you resume recording after the "Stop" operation, the system will add a title. If there is no interruption in the recording process from the beginning to the end, then only one title is available for the entire disc.
One Touch Recording (OTR)
This function enables you to set up the timer during the recording process. Once the scheduled time is reached, the system will stop recording automatically.
1.Enter the "Recording Mode" and start recording.
2.For desired timer recording, press the "REC/OTR" button once or several times.
The recording time will increase by 30 minutes with every pressing of the "REC/OTR" button. If the scheduled time exceeds the recordable time of the disc, normal recording mode will restore.
If the timer recording is paused or stopped, the system will cancel the timer recording process.
DV Controlled Recording
1. This unit can realise
Connect the DV to the unit (for details, see "System Connection: System Connection for Recording External Signals") by the front panel inputs.
Switch on the power of the unit.
Press the "DV" button.
Switch on the "Power" button of the DV, set it to the "CAMERA" mode, and start monitoring.
Press the "REC/OTR" button to start recording. (Other operations is the same as in the Recording Mode).
2. This unit can also record the VCR content of the DV.
The connection method is the same as stated in the first 3 steps of 1.
Switch on the "Power" button of the DV to enter the VCR status, and the VCR status is "Stop".
Use the remote controller of the unit to complete the operations of the DV, including STOP, PLAY, PAUSE, FB, FF, etc.
Press the "REC/OTR" button and then press the "PLAY" button to start recording.
During the recording process, press the "PAUSE" button to suspend recording of the unit, and press the button again to suspend the DV. To restore play of the DV, press the "PLAY" button; if you press the "REC/OTR" button, the play of the DV and the recording of the unit will resume at the same time; press the "FWD", "REV" button to complete forward or rewind operation for the DV, while it reports Pause status to the unit; If you press the "STOP" button, the recording of the unit will stop first, and press again to stop the play of the DV.
Caution:
Do not move the unit or switch off the power during the recording process.
The finalised DVD+R disc shall not be recorded.
Be sure to switch off the power of the unit and the DV before connecting the DV cables.
17
