System Setup
Audio Language Settings
1.In the Language Settings menu, use the 
or 
button to select the "Audio Language" item, and press the "SELECT" button to drop down a menu, as shown in the following chart.
2.Use the 
or 
button to select the language you want and
press the "SELECT" button. | System Setup - Language |
| |
* The system will give priority to this setting as the DVD audio | OSD Language | English | |
output language. If the DVD played does not support the selected | |||
Menu Language | English | ||
language, the setting is invalid. | Subtitle Language | Off | |
Audio Language | English | ||
* You can change the audio language any time during playing. | |||
| Chinese | ||
See "Play Mode" for details. |
| Danish | |
3. Press the "RETURN" button to return to the upper level menu |
|
| |
and set up other items. |
|
| |
Note: |
|
|
For the DVD language settings in this section, some discs might not contain the language you set. Then your settings will be invalid. The language played will be that provided by the disc.
Some discs may contain a language selection menu, your selection in this menu rather than the corresponding settings of the unit will be effective.
Channel Scan
The unit has a channel tuner. You can receive TV signals directly from the unit. Before the tuning, you must conduct a channel scan to enable the unit to tune in various channels automatically and determine their frequencies. The tuned channels will be saved automatically. Even if the power is off, the saved channel information will not be lost.
1.Press the "SETUP" button to enter the "System Setup" mode, press the 
or 
button to select the "Channel Scan" item; or you can also press the "SCAN" button and the "SELECT" button to enter the "Channel Scan" submenu, as shown in the chart.
System Setup - Channel Scan |
|
Tuner input source | Standard |
Scan channels | SCAN |
Modify channel information | EDIT |
Channel
| Name |
| ||||
| Frequency | 55.25MHz |
| |||
| Sound mode | PAL B/G |
|
| ||
| Skip | NO |
|
| ||
| Fine tune |
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
| |
| OK |
|
| Cancel |
| |
The meanings of the icons:
1)Tuner input Source: Cable, Air.
2)Scan channels: scan (scanning channels by frequency mode)
3)Modify channel information. When selected, the channel editor box will appear as shown in the chart.
2.Use the
or 
button to select "Scan Channel", and press the "SELECT" button to start scanning. When the system detects a channel in scanning, it will assign a channel number for it and save the channel.
To receive a TV program in the monitoring status, just enter the corresponding channel number. (The scanning process may take several minutes.)
41
