System Setup
Screen Saver Settings
The Screen Saver function means that when the unit is idle (or without monitored output) for some time, some interesting picture screen saver pictures will appear automatically. 
1. | In the General Settings menu, use the or button to move the | Screen Saver | ON | |
cursor and select the "Screen Saver" item. | Progressive/Interlace | ON | ||
Video Out | OFF | |||
2. | Press the "SELECT" button and the "Screen Saver" item will | YUV | ||
Video Output Format | ||||
PAL | ||||
drop down a list as shown in the chart. | Restore Factory Settings | OK | ||
|
| |||
3. | Use the or button to move the cursor, and select "ON" or |
|
| |
"OFF". | System Setup - General |
| ||
4. | Press the "SELECT" button to enable or disable the Screen Saver |
| ||
|
| |||
function. | Screen Saver | ON | ||
| When the screen saver appears, press any button to exit it. | Progressive/Interlace | Interlace | |
| Video Out | Progressive | ||
5. | Press the ''RETURN" button to return to the upper level menu | Video Output Format | Interlace | |
Restore Factory Settings | PAL | |||
and set up other items. |
| OK | ||
|
| |||
Progressive/Interlace
1.In the General Settings menu, use the 
or 
button to move the cursor, select the "Progressive/Interlace" item and press the "SELECT" button.
2.Select Progressive or Interlace option for video scan output mode, and press the "SELECT" button to confirm.
Video Out
1.In the General Settings menu, use the 
or 
button to move the cursor, select the "Video Out" item and press the "SELECT" button.
2.Select YUV, RGB or CVBS terminal according to your need and press the "SELECT" button to confirm.
System Setup - General |
|
Screen Saver | ON |
Progressive/Interlace | Interlace |
Video Out | YUV |
Video Output Format | YUV |
Restore Factory Settings | CVBS |
System Setup - General |
|
Screen Saver | ON |
Progressive/Interlace | Interlace |
Video Out | YUV |
Video Output Format | PAL |
Restore Factory Settings | PAL |
| NTSC |
Video Output Format | Screen Saver | ON | |
|
| ||
1. | In the General Settings menu, select "Video Output Format" | Progressive/Interlace | Interlace |
Video Out | YUV | ||
item and press "SELECT" button to drop down a menu. | Video Output Format | PAL | |
Restore Factory Settings |
| ||
2. | Select Pal or NTSC. |
| |
|
| ||
3. | Press "SELECT" button to confirm. | OK | Cancel |
|
| ||
This setting must be in accordance with the TV system, Otherwise the video output might not work properly.
Restore Factory Settings
1.In the General Settings menu, use the 
or 
button to select the "Restore Factory Settings" item and press the "SELECT" button. The OSD will display as follows.
2.Use the 
or 
button to select "OK'.
3.Press the "SELECT" button to restore all default settings, When your unit doesn't work properly, it may probably result from some wrong settings. Please try the "Restore Factory Settings" function to see if the unit can restore to its normal working status.
36
