Olivetti 2701, 2301 operation manual Select the covers that you wish to add

CONVENIENT COPY FUNCTIONS

1 Touch the key and then touch the [COVER] key in the special modes menu screen.

	The cover setting screen
L	will appear.
	The cover icon ( , etc.)
COVER
	will also appear in the
	screen to indicate that
	the function is turned on.

2 Select the cover(s) that you wish to add.

SPECIAL MODES									OK
							CANCEL		OK
	COVER
		FRONT	BACK	FRONT+BACK
					PRINT ON FRONT COVER?
						YES		NO

To add only a front cover, touch the [FRONT] key. To add only a back cover, touch the [BACK] key. To add both a front and back cover, touch the [FRONT+BACK] key.

6 Load the cover paper to be used into the bypass tray.

Load the same size of paper as the paper to be used for the copy job.

About the steps that follow

See page 23.

• It is not possible to copy on the inside of a

Note front cover, nor on either side of a back cover.

•Be sure to place the originals in the RSPF. The document glass cannot be used for this

function.

• During cover copying, stream feeding mode 3 will not function even if enabled in the key operator programs. (See the "Key

operator’s guide".)

•To cancel the cover copy function, select the cover copy function again and touch the [CANCEL] key. (See the screen of step 2.)

3

CK

Specify whether or not the front cover is to be copied on.

	CANCEL			Select [YES] or [NO] in
			OK
				the touch panel. If
PRINT ON FRONT COVER?
				[YES] is selected, the
	YES	NO

first page of the document will be copied onto the front cover sheet.

4 Touch the [OK] key in the cover setting screen.

Return to the special modes screen.

5 Touch the [OK] key in the special modes screen.

You will return to the main screen of copy mode.

49