Olivetti 2301, 2701 Checking the Toner Quantity and Total Output Count, Staple JAM Removal

TROUBLESHOOTING AND MAINTENANCE

STAPLE JAM REMOVAL

If staples become jammed in the stapler, the message "CHECK STAPLER POSITION OR STAPLE JAM." will appear. Follow these steps to remove the jammed staples.

1 Open the stapler cover.	4 Return the lever to its original
	position.

2 Grasp the green portion of the staple box and remove the staple box from the stapler.

5 Insert the staple box into the stapler unit until it clicks into place.

3 Raise the lever at the end of the staple box and remove the jammed staples.

6 Close the stapler cover.

CHECKING THE TONER QUANTITY AND TOTAL OUTPUT COUNT

The approximate quantity of toner remaining and the total output count can be displayed as explained below.

●The output count shows the combined output total of the copy, fax, and printer functions.

Checking the total output count and toner quantity

Hold down the [COPY] key. The total output count and toner quantity appear while the key is held down.

COPY

TOTAL COUNT : 0,123,456

TONER QUANTITY : 100-75%

SPECIAL MODES

2-SIDED COPY

A4

A3

OUTPUT

Note	•	Each A3 (11" x 17") page is counted as two pages. Two sided pages are also counted as two pages.
	•	The amount of toner consumed will vary depending on conditions of usage and the type of originals copied.
		The toner quantity display should only be used as an approximate guide.

74