Olivetti 2301 Loading paper in the bypass tray, Set the paper guides to the copy paper width

BEFORE USING THE MACHINE

Loading paper in the bypass tray

1 Unfold the bypass tray.	3 Insert the copy paper (print side
	down) all the way into the bypass tray.

To enable correct detection of the paper size, be sure to pull out the bypass tray extension.

2 Set the paper guides to the copy paper width.

Important points when inserting paper in the bypass tray

•Be sure to place envelopes horizontally as shown in the following diagram.

•Load the paper with the print side facing down.

Landscape Portrait orientation orientation

•When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap).

•When adding paper, first remove any paper remaining in the bypass tray, combine it with the paper to be added, and then reload as a single stack. The paper to be added must be the same size and type as the paper already in the bypass tray.

•Do not use paper that is smaller than the original image. This may cause smudges or unclean images.

•Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause smudges or unclean images.

18