Olivetti 2301, 2701 operation manual Multi Shot Copy

CONVENIENT COPY FUNCTIONS

MULTI SHOT COPY

The multi shot copy function is used to copy two or four originals onto one sheet of copy paper in a specified order.

Example: Copying four originals onto one sheet of paper (Page number: 4 in 1 ( ), layout: ( ))

One-sided copy of one-sided original

Copy

One-sided copy of two-sided original

•When using the multi shot copy function, place the originals, select the desired paper size, and select the copy mode before selecting the multi shot copy function in the special modes screen.

•When using the multi shot copy function, the appropriate copy ratio will be automatically set based on the original size, paper size, and the number of originals to be copied onto one sheet. The minimum reduction ratio is 25%. (The minimum ratio is 50% when SUPER PHOTO is selected for the original image type in the copy exposure settings or when the RSPF is used.) Depending on the original size, paper size, and the number of originals to be copied onto one sheet, portions of original images may be cut off.

1 Touch the [MULTI SHOT] key in the SPECIAL MODES menu screen.

The multi shot copy

DUAL PAGE 1/2

COPY	setting screen will
	appear. The multi shot
	copy icon ( , etc.) will
MULTI SHOT	also appear in the screen
	to indicate that the
	function is enabled.

2 Select the number of originals to be copied onto one sheet in the multi shot copy selection screen.

SPECIAL MODES							OK
	MULTI SHOT				CANCEL		OK
				LAYOUT		BORDER
		2in1	4in1

3 Select the layout.

				Select the order in which
	CANCEL		OK	the originals will appear
LAYOUT		BORDER		on the copy.

4 Select a borderline setting.

				Select [		], [	], or
	CANCEL		OK	[	].
LAYOUT		BORDER

5 Touch the [OK] key in the multi shot setting screen.

You will return to the special modes menu screen.

6 Touch the [OK] key in the special modes menu screen.

You will return to the main screen of copy mode.

7 Select the number of copies and any other desired copy settings, and then press the [START] key ( ).

8 [When using the RSPF:]

Copying will start after all originals have been scanned.

[When using the document glass:]

Replace the original with the next original and press the [START] key ( ). Repeat this step until all originals have been scanned, and then touch the [READ-END] key if necessary.

• The images may be rotated depending on

Note the number of originals and the orientation

of the originals and copy paper.

•To cancel the multi shot copy function, touch the [CANCEL] key in the multi shot setting screen (the screen of step 2) .

46