Punch function (only when a punch unit is installed)

When an optional punch unit is installed on the saddle stitch finisher, holes can be punched in the output. Punched output is delivered to the offset tray.

The punch function cannot be used in combination with the saddle stitch function.

For paper sizes that can be punched, see the specifications on page 2.

[Example]

 

Original 1

Punch hole positions

Original 2

Punch hole positions

 

 

 

 

 

 

 

 

Caution

The following types of paper cannot be stapled:

Transparency film, heavy paper*, label sheets, envelopes, postcards, thin paper

The following types of paper cannot be punched:

Transparency film, label sheets, envelopes, postcards, thin paper

Be sure to select the same paper size for the output. Stapling and punching are not possible when different sizes are mixed together. Note, however, that if the widths are the same, the "mix size original feeding mode"** function can be used to staple and punch different sizes of paper (saddle stitch is not possible).

**Stapling and punching are not possible if "mix size original feeding mode" includes sizes that cannot be stapled (such as 5-1/2" x 8-1/2" and A5).

*When performing cover copy, heavy paper used for covers can be stapled.

79d

Page 87
Image 87
Olivetti 2701, 2301 operation manual 79d, Punch function only when a punch unit is installed