Olivetti 2701, 2301 operation manual 79l, Discarding punch waste when a punch unit is installed

11 Raise the lever on the front edge of the staple box.

If the leading staple is bent, be sure to cut it off. If a bent staple is used for stapling, a staple jam will result.

13 Push in the staple box.

Push the staple box all the way in until you hear a "click".

12 Replace the front edge lever.

14 Push in the stapler section.

15 Close the front cover.

16 Push the saddle stitch finisher back onto the machine.

Caution

Make a test print or copy in staple sort mode to verify that stapling takes place correctly.

■Discarding punch waste (when a punch unit is installed)

1 Press the detach button and separate the saddle stitch finisher from the machine.

3 Replace the punch waste receptacle.

Caution	The saddle stitch finisher and the
	machine are connected at the rear.
	Exercise caution when pulling them
	apart.

2 Gently pull the punch waste receptacle forward and discard the punch waste.

Empty the punch waste receptacle into a garbage bag or other container, taking care not to let punch waste scatter.

4 Push the saddle stitch finisher back onto the machine.

79l