REPLACING THE STAPLE CARTRIDGE AND REMOVING STAPLE JAMS

A message will appear in the display when the staple cartridge needs replacement or a staple jam occurs. Follow the procedures below to replace the cartridge or remove the jam.

Replacing the staple cartridge

1 Open the front cover.

6 Install the new staple cartridge in the

 

staple box.

Insert the staple cartridge into the staple box and then press down on the staple box cover to lock the staple cartridge.

2 Pull the stapler section forward.

Caution

Do not remove the seal that holds the staples before installing the staple cartridge in the staple box.

Make sure that the new staple cartridge is locked securely in the staple box. Press down on the staple box cover until you hear a "click" indicating that the staple cartridge is locked.

3 Rotate roller rotating knob A in the direction of the arrow to move the staple unit all the way forward.

7 Pull the seal that holds the staples straight out.

Roller rotating

knob A

Staple unit

Rotate the roller rotating knob A until the triangle mark and indicator are aligned as shown in the illustration.

4 Remove the empty staple box.

5 Remove the empty staple cartridge.

Press the lock button to release the lock on the staple box cover and remove the staple cartridge.

Note The staple cartridge cannot be removed if staples remain in it.

8 Push in the staple box.

Push until you hear a "click".

9 Push in the stapler section.

10

Close the front cover.

 

Caution

Make a test print or copy in staple

 

sort mode to verify that stapling

 

 

 

 

takes place correctly.

79h

Page 91
Image 91
Olivetti 2701, 2301 79h, Replacing the staple cartridge, Pull the stapler section forward, Push in the staple box