Olivetti 2701, 2301 Automatic TWO-SIDED Copying, Using the Document Glass, Original → Paper

AUTOMATIC TWO-SIDED COPYING

Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used, two-sided copies of two-sided originals can easily be made.

Original → Paper

One-sided original → Two sides ( )

Document glass

		One-sided original			Two-sided original				Two-sided original
		→ Two sides				→ Two sides				→ One side
	(		)	(			)	(			)
	RSPF											2
Note	• Paper sizes that can be used are A5, B5, B5R, A4, A4R, B4, and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
	8-1/2" x 14" and 11" x 17").

•When making two-sided copies on letterhead paper, place the side with the letterhead face down if using a tray, or face up if using the bypass tray (This is the opposite of normal.).

•Automatic two-sided copying is not possible on thick paper, thin paper, labels, transparency film, envelopes, and other special types of paper.

•If automatic two-sided copying is performed using super photo mode, the memory may become full ("MEMORY IS FULL, SELECT ANOTHER EXPOSURE MODE." will appear.). Touch the [OK] key to cancel automatic two-sided copying, set the exposure setting to other than super photo mode, and select automatic two-sided copying once again.

•Automatic two-sided copying can be disabled in the key operator programs. (See the "Key operator’s guide".)

•When dual page copy (p.43) is selected, two-sided original to two sides or two-sided original to one side cannot be used.

USING THE DOCUMENT GLASS

1 Place the original on the document glass. (p.22)

2 Touch the [2-SIDED COPY] key.

2-SIDED COPY

OUTPUT

3 Touch the [One-sided to two-sided copy] key.

Touch the [BINDING CHANGE] key when making the tablet binding, or when making automatic two-sided copies of a one-sided A3 (11" x 17") or B4 (8-1/2" x 14") size portrait original, touch the [BINDING CHANGE] key.

Portrait-oriented original

(A3 or B4 (11" x 17" or 8-1/2" x 14") size)

Before [BINDING CHANGE] After [BINDING CHANGE]

4 Touch the [OK] key.

OK

BINDING

CHANGE

27