Olivetti 2701, 2301 79f, Using the saddle stitch finisher functions in printer mode

■Using the saddle stitch finisher functions in printer mode

To use the staple function, select "Left", "Right", or "Top" for "Binding Edge" and "1 Staple" or "2 Staples" for "Staple" in the "Finishing" field on the "Main" tab of the printer driver setup screen (shown at right).

To use the pamphlet function, select the "Pamphlet Style" radio button in the "Document Style" field and then select "Tiled Pamphlet" or "2-Up Pamphlet". In the "Finishing" field, select "2 Staples" for "Staple".

Caution	The "Pamphlet Style" function is not
	available unless the printer
	expansion kit is installed.

PCL printer driver on the Windows XP as an example

Printing Preferences

Using the punch function when an optional punch unit is installed

To use the punch function, select the "Punch" checkbox in the "Finishing" field of the "Main" tab shown above.

Note	• To use the above printer function, the peripheral device installation settings must be correctly configured in the
	printer driver properties. To configure the peripheral device installation settings, right-click the icon of the
	installed printer driver, select "Properties", and then select the "Configuration" tab. (In Windows 95/98/Me/NT
	4.0, select "Properties", select the "Setup" tab, and then select the "Configuration" tab.)

•The paper selection and combination of functions already selected may prevent some settings from being selected. For detailed explanations of the settings, see the Help file for the printer driver.

USING THE SADDLE STITCH FINISHER TO MAKE COPIES

■Orientation of the original when using the saddle stitch finisher function

When using the saddle stitch finisher to staple, make pamphlets, or punch holes, place the original as shown below. Staple and punch positions vary depending on the staple position setting and the orientation of the original.

Using the RSPF	Using the document glass	Staple positions (example)
Place the original face up.	Place the original face down.

Top left staple Two left staples

(11" x 17", 8-1/2" x 14" and 8-1/2" x 13" (A3 and B4) size portrait originals)

•	When loading letterhead paper in the tray, orient the paper so that
Note	the letterhead is away from you or to the left, as shown at right.

•When the staple sort or punch function is used, the automatic original image rotation function does not operate.

lower left staple

OLIVETTI OLIVETTI

79f