Olivetti 2301, 2701 operation manual JOB Program Memory, Storing a JOB Program, Press the key

JOB PROGRAM MEMORY

If you frequently use the same settings for copy jobs, you can store in the settings in a job program. Up to 10 job programs can be stored, and the programs are retained even when the power is turned off. By storing frequently used copy settings in a program, you can eliminate the bother of selecting the settings each time you use them for a copy job.

●After a job program is stored, if any settings of the key operator programs related to the stored job program are prohibited, the related settings in the job program will not be recalled.

●If the overwriting of job programs is prohibited in the key operator programs, it will not be possible to overwrite or delete a job program.

●To exit job program memory mode, exit the job memory mode, press the [CLEAR ALL] key ( ) on the operation panel or touch the [EXIT] key on the touch panel.

STORING A JOB PROGRAM

1 Press the [] key.

S

ACC.#-C

4 Select the copy settings that you wish to store in the program.

The number of copies

TO STORE, MAKE SELECTIONS AND PRESS

[OK], TO DELETE, PRESS [CANCEL].	cannot be stored.
SPECIAL MODES
2-SIDED COPY
	A4
	A3
OUTPUT

2 Touch the [STORE/DELETE] key.

NUMBER.

ECALLSTORE/DELETE

3 Touch a program number from 1 to 10 in the storage register screen.

ROGRAMS

SS PROGRAM NUMBER.

RECALLSTORE

If a numeric key is selected that has already Note been programmed, a confirmation screen

will appear. To replace the existing program with the new program, touch the [STORE] key and continue from step 4. If you do not wish to replace the existing program, touch the [CANCEL] key to return to the above screen and select a different numeric key.

5 Touch the [OK] key.

The selected settings will

D PRESS	CANCEL	OK	be stored under the
EL].
			program number
		AUTO
		EXPOSURE	selected in step 3.
	A4	AUTO A4

PAPER SELECT

A4

A3

100%

COPY RATIO

54