Olivetti 2701, 2301 JOB Build Mode, Touch the JOB Build key in the special modes menu screen

CONVENIENT COPY FUNCTIONS

JOB BUILD MODE

Use this function when you need to copy more originals than can be placed in the RSPF at once. (The maximum number of originals that can be placed in the RSPF at once is 100.)

• If the memory becomes full while scanning the originals, "MEMORY IS FULL. PRESS [START] TO BEGIN

Note COPYING OR [CA] TO CANCEL." will appear. To copy only the originals that have been scanned, press the [START] key ( ) . To cancel the job, press the [CLEAR ALL] key ( ).

•Depending on the content of the originals, the memory may become full before 100 originals have been scanned. In this case, press the [START] key ( ) to copy the originals that have been scanned, and then place the originals that weren’t scanned in the RSPF once again and repeat the copy procedure.

•To increase the number of originals that can be scanned, install more memory or increase the memory allocation in the key operator programs. (See the "Key operator’s guide".)

Example: Copying 130 sheets (A4 (8-1/2" x 11") size originals)

Originals

page 1

100 sheets

page 101

30 sheets

3

*Divide the originals into sets so that each set is no more than 100 pages. Scan the sets in order beginning from the first page of set A.

1 Touch the [JOB BUILD] key in the special modes menu screen.

		D	The [JOB BUILD] key is
T	ERASE		highlighted.
			The job build copy icon
	JOB		( ) will also appear in
Y		MUL	the screen to indicate
	BUILD
			that the function is
			enabled.

2 Touch the [OK] key in the special modes screen.

You will return to the

OK	main screen of copy
DUAL PAGE 1/2	mode.
ERASE
COPY
JOB
MULTI SHOT
BUILD

3 Place the original(s) in the RSPF.

(p.23)

4 Make sure that a suitable paper size is selected, select the number of copies and any other desired copy settings, and then press the [START] key ( ) .

	Scanning begins. When
	scanning of the first set
	of originals (A in the
	above example)	is
ACC.#-C	finished, insert the
	second set and press the
	[START] key (	).

Repeat this step until all the remaining originals (B in the above example) have been scanned.

Remove each scanned set of originals before inserting the next set.

5 Touch the [READ-END] key.

Copying begins.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

To cancel the job build mode function, touch Note the [JOB BUILD] key in the special modes

screen so that it is no longer highlighted. (See the screen of step 1.)

45