Rear Vision Camera
English Owner’s Guide
Note:
•Use this camera as an auxiliary means to check- ing obstacles.
Monitoring the rear vision camera
The rear vision camera can be connected to this unit.
For the power supply of the camera, mount the power box sold separately
1)Press the ADJ button 10 to select the CON- FIGURATION display.
2)Slide the Up/Down button 11 to 
(down) or
(up) to move the cursor to “CAMERA.”
3)Slide the Up/Down button 11 to 
(right) to change “OFF” to “ON.”
WARNING
THIS PRODUCT IS NOT INTENDED FOR VIEWING TELEVISION BROADCASTS OR VIDEO TAPES OR FOR PLAYING VIDEO GAMES. Such uses of this product may distract the driver or interfere with the dri- ver’s safe operation of the motor vehicle and may violate state law. CLARION DIS-
CLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY SUCH UNINTENDED USES OR FROM ANY IMPROPER USE OF THIS PRODUCT.
Note: |
•When “CAMERA” in the CONFIGURATION dis- play is turned on, the setting can be switched even if the camera has not been connected.
Note:
•When the monitor lock function is on, pressing the
(center) of the ENT button 11 to mute the
sound causes the L indicator 9 to flash.
*To cancel the monitor lock, press the VISU button 7 . The mode returns to the previous one and the
L indicator 9 goes off.
Connecting an external monitor
4)Press the ADJ button 10 to return to the pre- vious mode.
5)Press the VISU button 7 to switch to the camera mode.
Note:
•When you shift into the reverse gear, the rear vision camera is automatically turned on.
*To cancel the rear vision camera, change “ON” to “OFF” of the “CAMERA” in step 3) above.
Listening to a CD or cassette tape in rear vision camera mode (monitor lock)
You can listen to a CD or cassette tape while monitoring the rear vision camera.
1)Press the FUNC button 12 to select the mode you want to listen to (CD, tape, or radio).
2)Press the VISU button 7 to monitor the rear vision camera.
*The L indicator 9 lights.
An output terminal for an external monitor is pro- vided on the back of the unit to connect an exter- nal monitor.
1)Press the ADJ button 10 to select the CON- FIGURATION display.
2)Slide the Up/Down button 11 to 
(down) or
(up) to move the cursor to “MONITOR.”
3)Slide the Up/Down button 11 to 
(right) and switch “AUDIO” to “VISUAL.”
*Slide the Up/Down button 11 to 
(right)
26
