2)Slide the Up/Down button 11 to 
(down) or
(up) to move the cursor to “BEEP.”
3)Each time you slide the Up/Down button 11
to 
(right), the beep sound is turned on and off.
4)Press the ADJ button 10 to return to the pre- vious mode.
Titling
You can title a radio station or CD name (title) and store them. When the titled station is tuned in or the CD is played, its title appears in the dis- play.
Entering a title
Notes:
•Up to 30 FM band and 20 AM band stations can be titled. Also 50 CDs can be titled.
•If you try to input more than the specified number of titles, “OVER FLOW” appears in the display and further input becomes impossible. Delete unnec- essary titles to input new ones.
1)Select a station or CD which you want to title.
2)Press the TITLE button 23 and select the title input display.
*Each time you press the TITLE button 23 , the display switches in the following order.
Title input display 
TITLE SELECT
Previous mode | TITLE CLEAR |
3)Press button 16 and 17 to select the letter type.
Button 16 : Upper case letters and figures
Button 17 : Lower case letters and symbols
4)Slide the Up/Down button 11 to 
(up), 
(down), 
(left), or 
(right) to move the pink cursor to the letter you want to enter.
Press the 
(center) of the ENT button 11 . The selected letter is entered at the cursor (black) on the top of the display.
*Repeat steps 3) and 4) above to enter the title.
*If you entered the wrong letter, press the but- ton 20 to backspace the cursor (black) and enter the correct letter this time.
*Press the button 21 . The cursor (black) moves to the right.
5)After entering the title, press and hold 
(center) of the ENT button 11 for about 2 sec- onds. The title is stored when the beep sounds and the previous mode is recalled.
Note:
•The title list in radio mode displays only titles for the preset stations.
Clearing the title
1)Select the mode where the title you want to clear is stored (radio or CD mode).
2)Press the TITLE button 23 twice in CD mode or 3 times in radio or CD changer mode to go to the TITLE CLEAR display.
3)Slide the Up/Down button 11 to 
(down) or
(up) to move the cursor to the title you
want to clear and press and hold 
(center) of the ENT button 11 for about 2 seconds.
The title is cleared when the beep sounds.
4)Press the TITLE button 23 to return to the previous mode.
Changing the title
1)Select the mode where the title you want to change is stored (radio or CD mode).
2)Press the TITLE button 23 to select the title input display.
Change the title using the procedure described in step 3) above and in the sub- section “Entering a title.”
English Owner’s Guide
29
