CD Mode Operations
Note:
•
Loading and playing a CD
*When a CD is already inserted (When the DISC indicator 8 lights), press the FUNC button 12 and select CD mode. Playback starts automatically.
1)Press the CD button 3 . The operation panel turns downward and the CD Insertion slot 31 appears.
Note:
•When the operation panel angle has been adjust- ed with the SLOPE button 2 (excluding the case when it has been adjusted to the maximum angle), a CD cannot be inserted because the panel may damage it. Press the CD button 3 or press and hold the SLOPE button 2 to set the panel to the maximum angle and insert the CD.
For
2)Insert the disc into the CD Insertion slot 31 with the label side facing up.
CD mode is set and playback begins auto- matically.
*After a CD is inserted, the operation panel closes automatically. Adjust the panel angle with the SLOPE button 2 . When an operation panel angle has been stored, it is set to that position automatically.
*If the operation panel is turned downward after ejecting a cassette tape or due to other opera- tion, an alarm sounds, the operation panel closes, and the CD playback begins automati- cally.
CAUTION
Do not put your hand or fingers into the Cassette Insertion slot or CD Insertion slot, as this may cause a breakdown.
Be careful not to let your fingers get caught in the panel when it turns upward or down- ward.
3)Slide the Up/Down button 11 to 
(right) or
(left) to select a track.
: Selects the next track. (Example: The third track from the current one is select- ed by sliding the button 3 times.)
To return to the beginning of the current track, slide the Up/Down button 11 once
to 
(left).
: Selects the previous track. (Example: The third track before the current one is selected by sliding the button 1+3=4 times (the first sliding returns you to the beginning of the current track).)
Ejecting the CD
1)Press the CD button 3 to eject the CD.
2)Remove the CD.
Remove the CD only when the operation panel is turned downward. The panel closes automatically after a few seconds.
*When the operation panel angle has been stored, it is set to that position.
Notes:
•Do not leave a disc in the ejected position. If the unit is operated in such a condition, it may break down or damage the disc.
•When inserting a disc, insert it until it is fully drawn into the slot.
•When the operation panel is left in downward position, a repeated beep sounds. Remove or fully insert the CD or a tape and close the operation panel.
•Be careful not to let your fingers get caught in the panel when it turns upward or downward.
•When the CD button 3 is pressed, the eject oper- ation is performed even if a disc has not been loaded. During the eject operation, the SLOPE button 2 and the TAPE button 1 cannot be operated.
•If the operation panel is moved due to shock when set to the maximum angle, it must be reset to the maximum angle with the SLOPE button 2 before the CD can be ejected by pressing the CD button
3 .
English Owner’s Guide
21
