Ericsson LBI-39224 manual Vmim Site Selection, Vmim Configuration Menu

LBI-39224

two VMIM/CIA sets thus providing up to a total of sixty-four conventional channel interfaces per CEC/IMC. A VMIM is formed by a Controller Board and up to eight Audio Boards.

VMIM-related channel configurations are performed from the Site Channel Configuration dialog box. Although not required, it is recommended that VMIM channel configurations be accomplished prior to CIA rack-related conventional channel configurations which are described later in CONVENTIONAL CHANNEL CONFIGURATION on page 3-145.

VMIM "Site" Selection

Prior to actual channel configuration, the interface module to be configured must be selected. From the CEC/IMC Manager menu bar select Configure System / CEC/IMC Configuration / VMIM. When

VMIM is selected		two	new	choices are		made	available:
Audio Configuration		(VMIM audio			channel configuration)			and
Conv. Interface Adapter Configuration					(conventional		channel
configuration).	Select		Audio	Configuration		to display		the

Site Channel Configuration List dialog box for VMIM configuration.

Figure 22 VMIM Configuration Menu

Each Site Channel Configuration List dialog box displays the configurable "sites" and configured/active "sites." An active "site" represents an active Controller Board control data link. In the case of a

3-83