Manually Configuring Network Settings

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

3.Select “Built-in Ethernet” (2) next to “Show” in the Network menu..

(2)

(3)

(4)

(5)

4..Select the “TCP/IP” tab (3).. Next to “Configure” (4), you should see “Manually” or “Using DHCP”.. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected.. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password..

5..If “Manually” is selected, your Router will need to be set up for a static IP connection type.. Write the address information in the table below.. You will need to enter this information into the Router..

6..If not already selected, select “Using DHCP” next to “Configure” (4), then click “Apply Now”..

Your network settings are now configured for use with the Router..

N Wireless Modem Router

76

Page 78
Image 78
Belkin PM01527ea F5D8636-4 user manual Manually Configuring Network Settings