Belkin PM01527ea F5D8636-4 user manual For Dynamic IP connection, For Static IP connection

Alternate Setup Method

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

For Dynamic IP connection:

1..IP assigned by ISP – Select “Yes” if your ISP instructed you to use Dynamic IP..

2..VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here.. These identifiers are assigned by your ISP..

3..Encapsulation – Select LLC or VC MUX your ISP uses..

Click “Apply Changes” to save and activate your settings.. To go back to the original settings before saving, click “Clear Changes”; or click any of the Quick-Navigation links for other options.. Your new settings will not be saved unless you click “Apply Changes”..

For Static IP connection:

1..IP assigned by ISP – Select “No” if your ISP instructed you to use fixed IP..

2..IP Address – Enter an IP address assigned by your ISP for the Router WAN interface..

3..Subnet Mask – Enter a subnet mask assigned by your ISP..

4..Default Gateway – Enter a default gateway IP address assigned by your ISP..

5..VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameters here.. These identifiers are assigned by your ISP..

6..Encapsulation – Select the LLC or VC MUX your ISP uses..

Click “Apply Changes” to save and activate your settings.. To go back to the original settings before saving, click “Clear Changes”.. Or click any of the Quick-Navigation links for other options.. Your new settings will not be saved unless your click “Apply Changes”..

N Wireless Modem Router 34