Belkin PM01527ea F5D8636-4 user manual Manually Configuring Network Settings, sections

Manually Configuring Network Settings

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Set up the computer that is connected to the cable or DSL modem FIRST using these steps.. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet..

Manually Configuring Network Settings in Mac OS up to 9..x

1.Pull down the Apple menu.. Select “Control Panels” and select “TCP/IP”..

2.You will see the TCP/IP control panel.. Select “Ethernet Built-In” or “Ethernet” in the “Connect via:” drop-down menu (1)..

(1)

(2)

3..Next to “Configure” (2), if “Manually” is selected, your Router will need to be set up for a static IP connection type.. Write the address information in the table below.. You will need to enter this information into the Router..

N Wireless Modem Router 74