Belkin PM01527ea F5D8636-4 Alternate Setup Method, sections, ADSL Info, Page Name, A B C

Alternate Setup Method

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

12.. ADSL Info

Shows the ADSL status and transmission rates..

13.. Page Name

The page you are on can be identified by this name.. This User Manual will sometimes refer to pages by name.. For instance “LAN > LAN Settings” refers to the “LAN Settings” page..

Step 4: Configuring your Router for Connection to your Internet Service Provider (ISP)

Connection Type

From the “Connection Type” page, you can select one of these five connection types based on the instruction provided by your ISP:

•PPPoE

•PPPoA

•Dynamic/Fixed IP (1483 Bridged)

The “Internet/WAN” tab is where you will set up your Router to connect to your Internet Service Provider (ISP).. The Router is capable of connecting to virtually any ISP’s system provided you have correctly configured the Router’s settings for your ISP’s connection type.. Your ISP connection settings are provided to you by your ISP.. To configure the Router with the settings that your ISP gave you, click “Connection Type” (A) on the left side of the screen.. Select the connection type you use.. If your ISP gave you DNS settings, clicking “DNS” (B) allows you to enter DNS address entries for ISPs that require specific settings.. Clicking “MAC Address” (C) will let you clone your computer’s MAC address or type in a specific WAN MAC address, if required by your ISP.. When you have finished making settings, the “Internet Status” indicator will read “connection OK” if your Router is set up properly..

A

B

C

•Static IP (IPoA)

•Modem Only (Disable Internet Sharing)

Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking “Next”

(1)

N Wireless Modem Router 31