Ericsson LBI-39224 manual Mismatch Audio

LBI-39224
LOGGED	LOGGED					CAUSE/
WARNING	WARNING			CORRECTIVE
MESSAGE	DATA					ACTION
W06-033:	Logical	ID (LID) of		The CEC/IMC has received a
MISMATCH - AUDIO	the	unit	that	channel assignment for a unit that
CHANNEL	experienced		the	is marked active on another
	missed channel drop.			channel.	This is a missed channel
				drop condition – the CEC/IMC will
				drop the existing channel before
				routing		the	new	channel
				assignment.
W06-116:	Site number reported			The MIM assignment from the DIP
MISMATCH -	in the Site ID record			switches does not match the site
ASSIGNMENT	from the site.			number reported from the site.
				This warning will only be issued
				once by the MIM when detected.
W06-119:	(none)			A second Controller Board has
MISMATCH -				responded that is set up to be an
MULTIPLE END				end node.		This	message		is not
NODES				generated		by MOM		Controller
				Board firmware version 3.00 (or
				later); it is replaced by error
				message E07-119.
WO6-134:	New backup node ID			MOM has received a new backup
MISMATCH -				node ID for a redundant MIM pair
BACKUP ID				and has overwritten the old backup
				ID. This warning may occur when
				changing/resetting			the	primary/
				secondary MIMs, and is not a
				problem in this case. However, if
				this warning occurs at any other
				time it indicates the MOM may be
				confused about the primary/backup
				IDs; backup operation should be
				verified	(reset primary/secondary
				nodes). This situation is most
				likely to occur if a third MIM with
				the same assignment is mistakenly
				installed in the CEC/IMC.
W07-115:	The	maximum		An attempt was made to create a
OVERFLOW - PATCH/	number		of	patch/simulselect,			but	the	MOM
SIMULSELECT	simultaneous		patches	Controller Board patch/simulselect
	and	simulselects		table	already		contains		the
	allowed	on	this	maximum number of entries.
	switch.

B-4