Ericsson LBI-39224 manual Netclock Installation, NETCLOCK/2 Configuration

LBI-39224

Figure 58 NETCLOCK/2 Configuration

Using the RS-232 serial connection, the CEC/IMC Manager reads the 26-character ASCII time/date data from the receiver and updates the MOM Controller Board. The MOM then provides synchronized time and date messages to the CIMs and consoles.

6.2 NETCLOCK INSTALLATION

The following procedures must be performed in order to implement the NETCLOCK/2 time synchronization option:

1.Verify a COM port on the CEC/IMC Manager is available (COM2, COM3 or COM4).

2.Configure Microsoft Timeserv.ini as described in Timeserv.wri for Spectracom NETCLOCK/2

3.Install and configure the NETCLOCK/2 in accordance with the manufacturer's instructions.

6-2