Ericsson LBI-39224 manual Number of Slots Remaining

LBI-39224

TDM bus allocations are performed from the TDM Bus Configuration dialog box, shown in Figure 11. From the CEC/IMC Manager menu bar select Configure System / CEC/IMC Configuration / TDM Bus to display the TDM Bus Configuration dialog box.

Figure 11 TDM Bus Configuration Dialog Box

Current TDM Bus Configuration

When the TDM Bus Configuration dialog box is first opened this field may be blank until the CEC/IMC Manager receives the current TDM Bus configuration from the CEC/IMC MOM Controller. The current TDM Bus configuration is then displayed in this read-only field. TDM

bus configuration must match the specific hardware installed within the CEC/IMC for proper and effective routing of audio signals.

New TDM Bus Configuration

The number of TDM Buses the CEC/IMC will use to route audio signals is configured from this field. Select the required number of TDM Buses from the drop-down list box. TDM bus configuration must match the specific hardware installed within the CEC/IMC for proper and effective routing of audio signals.

Number of Slots Remaining

This read-only field displays the current number of TDM time slots available for assignment (allocation). This number will decrease as "site" channels are configured and allocated TDM time slots, conversely this number will increase as channels are "unconfigured." Changing the number of TDM Buses (above) will have a significant effect on the number of slots available; increasing the number of buses

3-20