Ericsson LBI-39224 manual Site Channel Configuration dialog box Save

Models: LBI-39224

1 330
Download 330 pages 24.07 Kb
Page 101
Image 101

LBI-39224

Site Channel Configuration dialog box

Save

Choose the Save button to perform an immediate save of the currently selected PIM channel configuration. Other PIMs displayed in the list box located at the top of the dialog box are not saved. This channel configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous channel configuration for the PIM, if present, is erased and replaced with the current channel configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager server, typically local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected PIM channel configurations to be saved as a different PIM. It is provided to speed configurations when similar configurations are required. Upon choosing Save As… a small dialog box (see Figure 17 on page 3-34) will appear which allows selection of a new PIM number. Select the desired PIM number from one of the choices in the drop-down list box, the choices listed are the selected PIMs in the Configured/Active Sites list box. Like Save, Save As… stores channel configuration on the CEC/IMC Manager local to the CEC/IMC.

For example, if "Site 8" is the currently selected site-type interface module and "Site 12" requires similar configuration settings, this button may be used to save "Site 8" configuration as "Site 12" (save to "12"). The new "site" may then be changed later, as required, by selecting it from the selection list box, changing the configuration as required, and then choosing Save.

Close

Choose the Close button to exit the Site Channel Configuration dialog box and return to the Site Channel Configuration List dialog box. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit without saving (No), or cancel the Close command and remain in the dialog box (Cancel).

3-71

Page 101
Image 101
Ericsson LBI-39224 manual Site Channel Configuration dialog box Save