Ericsson LBI-39224 manual 176

LBI-39224

The Selected Module text box displays the module number selected in the Logging Recorder Configuration dialog box, this is read-only information.

Select the database (unit, group, or conventional) for the entity you wish to program by selecting the appropriate option button at the top of

the dialog box. This will automatically program the LRIM Module Edit dialog box with all entities belonging to that database. The desired entity for programming is selected from the drop-down list box which will be labeled according to which database was selected (Unit ID, Group ID, or Conv ID). Units, groups, and conventional channels are all programmed in the same manner.

NOTE

The LRIM also handles the patch/simulselect feature of the CEC/IMC. If multiple groups are patched/simulselected together then audio transmissions on the SAID (System Assigned ID) will be routed to each of those groups programmed at the LRIM.

The Channel text box will automatically display the channel

corresponding to the selected module in the Logging Recorder Configuration dialog box. This value may be edited with any available channel. Summation may be obtained by assigning multiple modules to the same channel. By assigning each module a unique channel number, summation will not occur.

Volume levels are adjusted using the Output Level drop-down list box and selecting the desired volume. The volume range is -25 dBm as the minimum and +10 dBm as the maximum.

The Programmed text box shows the program status at the Logging Recorder. This text box is read-only information. A "Yes" indicates the module is programmed, a module is programmed in the Logging Recorder Configuration dialog box in one of two ways:

– selecting individual modules in the Logging Recorder Configuration dialog box and choosing the Send Mod button (changed data must be saved to disk prior to programming), or

3-176