5-13
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter5 Command Reference
ppp mux subframe count
ppp mux subframe count
To set the maximum number of PPP subframes that can be contained in a superframe, use the ppp mux
subframe count command in interface configuration mode. To set the maximum number to the default,
use the no form of this command.
ppp mux subframe count integer
no ppp mux subframe count
Syntax Description
Defaults The default maximum is 15.
Command Modes Interface configuration
Command History
Usage Guidelines To use this command, you must first enable PPP multiplexing/demultiplexing.
Examples The following example sets the maximum subframe count to 20 bytes.
ppp mux subframe count 20
Related Commands
integer The maximum number of subframes that can be contained in a superframe.
Possible values are 1 through 15 bytes.
Release Modification
12.2(8)MC2 This command was introduced.
Command Description
ppp mux Enables PPP multiplexing/demultiplexing
ppp mux delay Sets the maximum delay.
ppp mux frame Sets the maximum length of the PPP superframe.
ppp mux pid Sets the default PPP protocol ID.
ppp mux subframe length Sets the maximum length of the PPP subframe.
show ppp mux Displays PPP mux counters for the specified multilink interface.