5-12
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5 Command Reference
ppp mux subframe length
ppp mux subframe length
To set the maximum length (in bytes) of the PPP subframes, use the ppp mux subframe length
command in interface configuration mode. To set the maximum length to the default, use the no form of
this command.
ppp mux subframe length integer
no ppp mux subframe length
Syntax Description
Defaults The default maximum length is 195.
Command Modes Interface configuration
Command History
Usage Guidelines To use this command, you must first enable PPP multiplexing/demultiplexing. The maximum length of
the subframe should be the maximum length of the superframe minus the length of the L2 header.
Examples The following example sets the maximum subframe length to 20 bytes.
ppp mux subframe length 20
Related Commands
integer The maximum number of bytes in any single subframe that is to be
multiplexed. Possible values are 1 through 512 bytes.
Release Modification
12.2(8)MC2 This command was introduced.
Command Description
ppp mux Enables PPP multiplexing/demultiplexing
ppp mux delay Sets the maximum delay.
ppp mux frame Sets the maximum length of the PPP superframe.
ppp mux pid Sets the default PPP protocol ID.
ppp mux subframe count Sets the maximu m number of subframes in a superframe.
show ppp mux Displays PPP mux counters for the specified multilink interface.