Cisco Systems 78-13983-04 manual Show ppp mux, Interface interface

Chapter 5 Command Reference

show ppp mux

show ppp mux

To display counters for a multilink interface on the MWR 1900, use the show ppp mux command in EXEC mode.

show ppp mux [interface interface]

Syntax Description	interface interface	(Optional) The identifier of the multilink or serial interface for which you
		want to view counters.
Defaults	If no interface is specified, statistics for all multilink and serial interfaces are displayed.

Command Modes

Command History

EXEC

ReleaseModification

12.2(8)MC2 This command was introduced.

Usage Guidelines	This command is only valid when issued against multilink or PPP interfaces.
Examples	The following is an example of the output generated by this command.
	show ppp mux	interface multilink 1
	PPP Multiplex Statistics on Interface Multilink1:
	Multiplex:
	Total input	packets:0
	Errored input packets:0
	Valid input	bytes:0
	Total output packets:0
	Multiplexed	output packets:0
	Output bytes:0
	Efficiency improvement factor:0%
	Demultiplex:
	Total input	packets:0
	Multiplexed	input packets:0
	Errored input packets:0
	Valid input	bytes:0
	Total output packets:0

Output bytes:0

Efficiency improvement factor:0%

Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide

78-13983-04 5-17