5-16
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5 Command Reference
show ip rtp header-compression
Related Commands
dropped Number of dropped packets.
buffer copies Not applicable to the MWR 1900 router.
buffer failures Not applicable to the MWR 1900 router.
Sent: total Total number of packets sent.
compressed Number of packets sent with compressed header.
bytes saved Total savings in bytes due to compression.
bytes sent Not applicable t o the MWR 1900 router.
efficiency improvement factor Efficiency achieved through compression.
Connect: rx slots Total number of receive slots.
tx slots Total number of transmit slots.
long searches Not applicable to the MWR 1900 router.
misses Number of new states that were created.
hit ratio Number of times existing states were revised.
five minute miss rate Average miss rate.
max. Maximum miss rate.
negative cache Not applicable to the MWR 1900 router.
Table5-1 show ip rtp header-compression Field Descriptions (continued)
Field Description
Command Description
ip rtp
compression-connections
Specifies the total number of RTP header compression connections
that can exist on an interface.
ip rtp header-compression Enables RTP header compression.